1. The relevant parts that need to be installed in the Discount Wood crusher should be cleaned to avoid dust or dirt on the surface of these parts that will affect the subsequent use. There are also some parts surface that may be sprayed with rust inhibitor before leaving the factory, so we need to clean it up.
2. Carry out the equipment step by step according to the instructions of the manual. When it is the turn of the equipment crusher, open the package of the crusher. The structure, compatibility and conditions of each equipment are different. Different Discount Wood crusher needs to be used. Different approaches to equipment.
3. Confirm that the installation process of each step is correct, and whether there is any reverse connection between the components. After the installation is completed, check all parts of the Discount Wood crusher as a whole.